Awning Kit for Sailboat 10' x 18' Made With Surlast Fabric

Item Number: 19061
Sale Unit: Each
Surlast Color   
 

Sew it yourself! Awning Kit for Sailboat 10’ x 18’ Made With SurLast Fabric provides the basic materials to make an awning for your sailboat. Find comfort, shade, and protection in the cockpit while anchored or docked with a sailboat awning. There are many different awning styles and ways to customize an awning to fit perfectly on your boat.

This cockpit awning kit includes SurLast fabric, which is a woven polyester with exceptional strength, dimensional stability, and abrasion, water, mildew and UV resistance. An excellent choice for awnings, SurLast is lightweight and easy to fold while being strong and water resistant.

Due to varying styles and configurations, kits are identified by the size of the fabric blank. Fabric panels do not come pre-sewn, but size indicates dimensions after sewing together (before hems and sleeves). Finished size will be approximately 1 foot shorter and 6 inches narrower. Width and length can be interchanged.

Awning Kit for Sailboat 10’ x 18’ Made With SurLast Fabric Includes:

  • 13 yd. SurLast Fabric—Select color from drop down menu
  • 1 oz. V-69 White UV Polyester Thread
  • 60 ft. White Classic 3-Strand Polyester Line 1/4″ 6 mm.
  • 9 #6 Brass Rings 7/8″
  • 3 ft. Nylon 3/4″ Webbing 700#
  • Seamstick 3/8″ Basting Tape for Canvas
  • Sailrite Adhesive Backed Logo
  • Awning Kit Instructions
Finished Sailrite Boat Awning Kit Installation
See how the Sailrite crew installed a completed Sailrite Boat Awning Kit on a Seward 24. This flat awning configuration is one of three different ways to configure a boat awning. Each method is highlighted in the written instructions included with each kit.
Building a Sailrite Boat Awning Kit – Part 1
Measuring and cutting panels, sewing seams, and finishing outside hems for your Sailrite Boat Awning Kit.
Building a Sailrite Boat Awning Kit – Part 2
Center webbing reinforcement, brass ring halyard attachment points, and corner ring installation instructions for your Sailrite Boat Awning Kit.
How to Install a Slit in a Boat Awning for Topping Lift
Create a slit in the boat awning to allow for the exit of a topping lift and the backstay to rest on the awning pole (inserted in sleeve).
Related Items
Awning Kit for Sailboat 14' 7" x 18' Made With Stamoid Fabric
Sale Unit: Each
Item Number: 1334
Stamoid Color   
 
Awning Kit for Sailboat 11' 4" x 18' Made With Sunbrella Fabric
Sale Unit: Each
Item Number: 1352
46" Sunbrella Colors   
 
Forespar Awning Pole Telescopes 69"-120"
Sale Unit: Each
Item Number: 505000
 

Welcome to Sailrite! We have been having technical difficulties. If you have trouble ordering, please use our live help, or give us a call at 800.348.2769 Mon – Fri, 8am - 5pm EST/EDT

Any rights not expressly granted herein are reserved.

Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella Plus, Sunbrella Supreme, Sunbrella Canvas, Sunbrella Sling are registered Trademarks of Glen Raven, Inc. Lift-The-DOT©, Pull-The-DOT©, Common Sense© and Pull-It-Up™ are registered Trademarks of Scovill Fasteners, Inc. YKK® is a registered trademark of YKK CORPORATION in Japan and other countries/regions. Velcro® is a registered Trademark of Velcro Industries B.V. Ultrafeed™ and Sailrite™ are registered trademarks of Sailrite Enterprises, Inc.

Copyright ©2013 www.sailrite.com