| |
|
| Batten Material & End Caps |
| Pultruded fiberglass reinforced heavy duty sail battens for sailboat sails. Also find tapered battens designed to be light weight and durable. We stock may batten end caps for your batten application. | |
 |
| |
| |
| |
|
| Cleats |
| Here you will find cleats for your sail's leach line, jam cleats, HITCHCRAFT RopeTies and Harken® clam cleats which are still the best performing cleats on the market. | |
|
| |
| |
| |
|
| D-Rings, Round Rings & Eyelets |
| D-Rings, Round Rings used in the head and tack corners of roller reefing headsails. Also find Ring & Eyelets used for corner attachments in sails or anywhere a purchase on fabric is required. | |
|
| |
| |
| |
|
| Hanks |
| These Hanks attach on the forestay wire and are installed to the sail by inserting a screw into two plastic "ears" that fit over and behind the luff reinforcement. These hanks are used primarily on day sailing boats under 20 feet. | |
|
| |
| |
| |
|
| Headboards & Rivets |
| Headboards are used in sails to provide support for additional roach area and a purchase point for the halyard. Use these rivets in headboards, leech line cleats and other applications. | |
|
| |
| |
| |
|
| Hoops |
| Sail Hoops used for the Sunfish sailboat. Also find the White Oak Mast Hoop which is steam bent into rings then copper riveted and finished with oil and shellac. | |
|
| |
| |
| |
|
| Sail Numbers, Insignia, Logos & UV Dacron |
| Basic boat identification sail numbers. No sewing required. Just peel away the backing paper and smooth in place. You will also find some sailboat logos and UV Protected Dacron Adhesive material used in protecting roller furling sails. | |
|
| |
| |
| |
|
| Sail Track & Mast Stops |
| This rolled stainless sail track is commonly used on wooden spars in conjunction with external slides. Makes hoisting the sail up and down the mast possible. | |
|
| |
| |
| |
|
| Shackles |
| Shackles are often used to secure a slug or slide to the sail. There are several ways in which they can be installed depending on the shackle choice. | |
|
| |
| |
| |
|
| Slides |
| Sail slides are used to secure mains or mizzens to their spars. They are attached ahead of the boltrope and inserted in the slot instead of the rope. | |
|
| |
| |
| |
|
| Slugs |
| Sail slugs are used to secure mains or mizzens to their spars. They are attached ahead of the boltrope and inserted in the slot instead of the rope. | |
|
| |
| |
| |
|
| Snaps (Jib Snaps) |
| Sail Snaps are used to secure jibs to the wire forestay. A sail snap locks positively over the stay with a sliding piston or a torsion spring that closes a hooked end. | |
|
| |
| |
| |
|
| Spinnaker Hardware & Gear |
| Spinnaker Hardware – ATN Tacker, Brummel Hooks, Spinnaker Hoops, Sister Clip with Ferrule, Double Swivel Shackles and more. | |
|
| |
| |
| |
|
| Tack, Clew & Headboard Plates |
| Headboards, Clew Plates & Tack Plates are simple plates that are either webbed in place at the corners of sails or covers or that are riveted in place as matched pairs on opposite sides of the fabric. | |
|
| |
| |
| |
|
| Tell-Tales |
| Tell tales show the air flow across the sails—allowing you to trim sails for maximum performance. | |
|
| |
| |
| |
|
| Tiller Extensions |
| Tiller extensions by Ronstan provide the highest level of control, for quick, decisive helm response in every situation. | |
|
| |
| |
