Head Rod Clamp Awning Hardware

Item Number: 281506
Sale Unit: Each
 
These aluminum parts can be used across the top of an awning to provide additional support between rafters or primary support where no rafter will be used (use two #10 wood screws). A head rod pipe is installed into a sleeve and that pipe is secured to the building using this clamp.

If installing in cement use cement anchors and appropriate screws.

The correct pipe for the head rod is 1/2" EMT (Electrical Metallic Tubing).

  • Height - 1 3/4"
  • Width - 2 1/16"
  • Mounting holes 1 5/16" on center
  • Sold Each
  • Related Items
    Rod and Rafter Holder Awning Hardware
    Sale Unit: Each
    Item Number: 284103
     
    Camel Back Hinges Awning Hardware
    Sale Unit: Each
    Item Number: 238020
     
    Jaw End with Lag Screw Awning Hardware
    Sale Unit: Each
    Item Number: 282204
     
    Slip Fit Eye Ends 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 282190
     
    Slip Fit Tie Down Clamp 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 281698
     
    Square Slip Fit Elbow 3/4" x 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 123397
     
    Slip Fit Front Bar Fitting 3/4" x 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 130580
     
    Pipe Clamp 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 112843
     
    Awnings Are Easy Book
    Sale Unit: Each
    Item Number: 100749
     
    How to Make a Loose Frame Awning Video
    Sale Unit: Each
    Item Number: 200387
    How to Make a Loose Frame Awning with a Scalloped Edge Video
    Sale Unit: Each
    Item Number: 200396
    How to Make a Square Frame Awning with Tie Down Bar Video
    Sale Unit: Each
    Item Number: 200393