MC-SCR Power System 230 Volt

Item # 100947
Be the first to Write a Review
Stock: Available
$599.00/EA
$599.00/EA

Item Description

Made in the USA Exclusively for Sailrite. MC-SCR Power System™ is a motor control/silicon controlled rectifier. This solid state controller with the 230 volt motor is compact, powerful and offers much greater slow speed power and control than the Clutch Motor. Speed is controlled with a high quality potentiometer foot pedal. Power is consistently strong—from start up to the top speed of 1,550 stitches per minute. The MC-SCR Power System weighs 9 pounds. Designed for our European customers, this power system is 230 volt 50/60 Hz with a two round pin European plug.

Includes:

  • MC-SCR controller
  • 230 volt motor
  • Motor bracket
  • Foot pedal
  • Adjustable length belt (Belt-V Power Twist - 3 feet)

Purchase the MC-SCR to power the Sailrite 111 and Professional sewing machines or to replace the clutch motor on an existing commercial sewing machine.

Please Note: To attach the motor to the table top bottom use 2 each of the following; #100842, #100844, #100845.

Includes:

  • MC-SCR controller
  • 230 volt motor
  • Motor bracket
  • Foot pedal
  • Adjustable length belt (Belt-V Power Twist - 3 feet)

Please Note: To attach the motor to the table top bottom use 2 each of the following; #100842, #100844, #100845.

Videos

MC-SCR Power System Demo

The MC-SCR power system in action. Tons of power and slow speed control in thick fabric assemblies.

Servo motor compaired to Sailrite MC-SCR Sewing Machine Motor

Servo sewing machine motors are promoted strongly, but the truth is that they are weak performers at slow speeds in medium to heavy weight materials. Watch this video and see the servo motor verses the Sailrite MC-SCR motor. There is no comparison. Sailrites MC-SCR power system beats the servo motor for slow speed control and power.

How to Install the MC-SCR to a Sewing Machine Table

NOTE: Sewing machine configurations and table tops vary! Please check your measurements for the correct mounting position prior to drilling into your table top. To do this install the balance wheel and the motor's pulley on the sewing machine and motor. Place the belt on the balance wheel and run it to the motor pulley to determine the correct motor mounting position for the motor bracket.

Fine Tuning Adjustment of the MC-SCR Motor System for Sewing Machines

Shows how to adjust the MC-SCR Motor System for optimal speed control for your particular application.

Ratings & Reviews

No reviews available

Be the first to Write a Review