Phifertex Plus Vinyl Mesh Delray Stripe Poolside 54″ Fabric is a tightly woven 100% vinyl-coated woven polyester mesh. This designer mesh fabric has excellent dimensional stability and flexibility in all climates making it the perfect choice for sun shades and other outdoor applications. Phifertex Plus provides very good privacy and also allows good interior light as a window covering. Phifertex Plus Mesh provides a 90–95% shade factor and can be used to extend the life of vinyl windows.
Phifertex mesh fabric is ideal for patio furniture, sling chairs, roller shades, outdoor cushion covers, boat cockpit cushions, boat enclosures, structural awnings, RV and yacht window covers, placemats, and water draining bags. Use Phifertex material on the bottom of outdoor cushions so that they can drain dry. Phifertex Plus Delray Stripe Poolside is also easy to cut, sew and clean! Made in the USA.
16 oz. per square yard
Sold per linear yard.
Yards Per Roll:
Phifertex Plus Vinyl Mesh Delray Stripe Poolside 54″ Features:
100% woven vinyl-coated polyester
90–95% Shade factor
Excellent dimensional stability
Flexible in all climates
Breathable - water and air can pass through
Microban® antimicrobial protection
Lead Free: REACH (EC1907/2006) compliant
GREENGUARD® Select Certified
Easy to sew (use a #18 or #20 needle with V-69 or V-92 thread)
Phifertex Cleaning Instructions:
Prepare cleaning solution using 1 tbsp. liquid dish detergent and 2 tbsp. household bleach in one gallon of water. Clean fabric with sponge or soft cloth dipped in solution.
Rinse thoroughly with clear water and air dry.
Avoid direct contact with oil-based products which may cause accelerated aging of fabric. If direct contact occurs, clean promptly.
Regular maintenance of your Phifertex fabric will help extend the life of the fabric. Clean Phifertex 1–2 times a year when in moderate use (more frequently when used heavily).
Snap-on Window Cover for Boat & RV's: Cut Phifertex to the size of the window adding an inch to each side all round. Fold over 1/2-inch hems and sew with V-69 or V-92 thread or finish the raw edges with binding tape. Install snap fasteners at each corner and at 3 foot intervals (or as required) along the length of each side.
Window Roller Shades: Cut Phifertex using a T-square to cut straight sides. Create a hem at the bottom for a wood or fiberglass batten and use adhesive tape to attach the fabric to a roller shade.
Be the first to know about promotions, new products, or great how-to advice.
Any rights not expressly granted herein are reserved. Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella® Plus, Sunbrella® Supreme, Sunbrella® Canvas, Sunbrella® Sling are registered Trademarks of Glen Raven, Inc. Lift-The-DOT®, Pull-The-DOT® and Common Sense® are registered Trademarks of Scovill Fasteners, Inc. YKK® is a registered Trademark of YKK CORPORATION in Japan and other countries/regions. Velcro® is a registered Trademark of Velcro Industries B.V. Sailrite®, Ultrafeed® and SnapRite® are registered Trademarks of Sailrite Enterprises, Inc.