100% View

Phifertex Vinyl Mesh Sand 54" Fabric

Item #: 416

  • Stock
  • Sailrite stocks what we sell. If you order more of an item than we have on hand, you will be notified in the cart.

    Backorder Policy >

Need a Sample?

About Fabric Samples >

Have a Question?


You may also be interested in:

Phifertex Plus Vinyl Mesh Sand 54" Fabric


Thread V-69 White Polyester UV 1oz


Thread V-92 White Polyester UV 1oz (250 Yds)


Thread V-92 Polyester Oyster UV 4oz




Phifertex Mesh is a designer mesh fabric with excellent dimensional stability and flexibility in all climates. This 100% vinyl-coated woven polyester mesh provides very good privacy and also allows good interior light as a window covering. Phifertex provides a 70% shade factor and can be used to extend the life of vinyl windows.

Phifertex mesh fabric is ideal for patio furniture, roller shades, boat enclosures, heat-filtering structural awnings, RV and yacht window covers, placemats, and water draining bags. Use Phifertex material on the bottom of outdoor cushions so that they can drain dry. Phifertex is also easy to cut, sew and clean!


Width: 54 inches
Weight: 11.3 oz. per square yard
Shade Factor: 70%
Openness Factor: 35%
Sale Unit: Sold per linear yard
Yards Per Roll: 60
Color: Sand


  • 100% woven vinyl-coated polyester
  • 70% Shade factor
  • Excellent dimensional stability
  • Flexible in all climates
  • Fade resistant
  • Breathable - water and air can pass through easily
  • Easy to sew (use a #18 or #20 needle with V-69 or V-92 thread)

Phifertex Cleaning Instructions:

  • Prepare cleaning solution using 1 tbsp. liquid dish detergent and 2 tbsp. household bleach in one gallon of water. Clean fabric with sponge or soft cloth dipped in solution.
  • Rinse thoroughly with clear water and air dry.
  • Avoid direct contact with oil-based products which may cause accelerated aging of fabric. If direct contact occurs, clean promptly.
  • Regular maintenance of your Phifertex fabric will help extend the life of the fabric. Clean Phifertex 1–2 times a year when in moderate use (more frequently when used heavily).

Snap-on Window Cover for Boat & RV's: Cut Phifertex to the size of the window adding an inch to each side all round. Fold over 1/2-inch hems and sew with V-69 or V-92 thread or finish the raw edges with binding tape. Install snap fasteners at each corner and at 3 foot intervals (or as required) along the length of each side.

Window Roller Shades: Cut Phifertex using a T-square to cut straight sides. Create a hem at the bottom for a wood or fiberglass batten and use adhesive tape to attach the fabric to a roller shade.

For a tighter weave and 90-95% shade factor, see Phifertex Plus.