Posi-Pin Wheel Bushing for Fabricator, 111 & Professional Sewing Machines
This replacement Posi-Pin Bushing is installed on all 2017 or newer Sailrite Fabricator and Professional sewing machines as the bushing the Stitch PRO Balance Wheel sits on.
If you have a Sailrite Professional or 111 purchased before 2017 that runs on either the MC-SCR Power System or the Workhorse Servo Motor with a cogged motor pulley and want to upgrade to the Posi-Pin System you can with this bushing and the other items listed below.
Parts Required for Posi-Pin Upgrade
- Posi-Pin Wheel Bushing for Fabricator, 111, and Professional Sewing Machines #120624
- Posi-Pin Nut #100536
- Posi-Pin #102043
- 2 Set Screws for Bushing #713100
- Allen Wrench 3/32” #102264
- Stitch PRO Balance Wheel #107161
- 42” Cogged Timing Belt (#120580) for Sailrite machines with the Workhorse Servo Motor or 38.4” Cogged Timing Belt (#100817) for Sailrite machines with the MC-SCR Power System
- Belt Cover for Professional & Fabricator #120616
Please note: The Posi-Pin System should only be used in conjunction with the Stitch PRO Balance Wheel. Using any other flywheel may result in damage to the flywheel and/or the machine drive assembly. This bushing may also work for installing the Posi-Pin System on other full-size industrial sewing machines with a main shaft diameter equal to 0.580 inch and that protrudes between 1 inch and 1-1/2 inches away from the casting.