Professional Long Arm Sewing Machine - 20.5 inch Zigzag Sewing Machine Complete in a Stand with the MC-SCR Power System is an industrial sewing machine that features more arm length for bigger projects. Compare 20.5" to the standard 10.75" inside arm length.
At last Sailrite has developed a big long arm, commercial straight and zigzag "Walking Foot" machine for the sewing professional and for the amateur with serious intentions or a really large boat.
Many amateurs are ready to take on bigger projects and many professionals have found that there is really nothing in current production that meets their needs. Well here it is — the Sailrite Professional engineered from the ground up as a machine for canvas and sail production work. It will do everything needed and it will do it with greater consistency and ease than you ever imagined.
The Professional is a full size long arm, rotary machine that features a powered "Walking Foot" similar to the Ultrafeed’s but with a large hook and bobbin mechanism to reduce the frequency of bobbin winding and allow for the use of very heavy thread. It sews a 5mm long straight stitch and a 10 mm wide zigzag stitch. Maximum sewing speed is 1550 stitches per minute with the included MC-SCR motor and controller (the Professional head is rated to handle up to 2500 spm - running the machine slowly increases reliability). It has reversing capability.
Use the Professional for heavy materials and thick fabric assemblies as well as light to medium work. It is an excellent choice for everything from spinnakers to 10oz storm sails. We guarantee that this machine will outperform anything in its class.
Includes:
40 assorted needles
1oz cone of thread
3 large capacity bobbins
Thread stand
Bobbin winder
2-point cam
Oil
Screw drivers
Support Pin
Deluxe seam ripper
Maintenance brush
Instructional video with an electronic Guidebook in PDF format
K-Leg Commercial Stand Table
MC-SCR Power System by Sailrite
Power Twist V-Belt
Presser foot lifting treadle
Table light
Drawer
Rubber foot pads
Guarantee: A Sailrite Professional Long Arm Sewing Machine can be returned in 30 days for a full refund less 10% restocking fee and delivery. All parts (excluding needles, feed dogs, rotary hooks, throat plates, bobbins and belts) are fully guaranteed for two years. Labor for repairs is provided at no charge for two years, but our goal is to enable you to maintain and repair your own machine. If it must be returned for repair, you will be responsible for delivery both ways.
Specifications
Shuttle: full rotary, gear driven
Maximum sewing speed per min: 2500 stitches (1550 with MC-SCR system)
Max. straight stitch length: 5 mm
Max. zigzag width: 10 mm
Needle System: 135 x 17
Bed size: 29" (compared to standard 18.75") x 7"
Underarm space: 20.5" (compared to standard 10.75") x 4"
Presser foot lift: hand lever 5/16″ / foot treadle 7/16″
Commercial Stand Table This is the traditional way a commercial sewing machine is used. It provides a very solid sewing platform on which to work. The table surface is 24" deep by 59.25" wide. Leg height is adjustable. The cutout for the machine head is 7 1/8" by 29"
This package includes the MC-SCR Power system™A "motor control / silicon controlled rectifier". This solid state controller with 120 volt DC motor (1/3rd HP, 3100 RPM) is compact, powerful and offers much greater slow speed power and control than the Clutch Motor described above. Top speed is 1550 stitches per minute. Speed is controlled with a high quality potentiometer foot pedal. Power is consistently strong—from start up to top speed.
Included in the MC-SCR system:
MC-SCR controller
Motor
Motor bracket
Foot pedal
Adjustable length belt
Sailrite recommends the PowerPlus Wheel (pictured above, but not included) for the MC-SCR Power System (#100847) as an upgrade to the Sailrite Professional. The PowerPlus wheel will slow the machine down even further and once again increase power. Top speed with the PowerPlus wheel is 800 stitches per minute.
