horizontal stitch
left banner

Pull The Dot (One Way) Snap - Cloth-to-Cloth Stud

DOT® Pull The Dot (One Way) Snap - Cloth-to-Cloth Stud - Key T

Item #: 555100

  • Stock
  • Sailrite stocks what we sell. If you order more of an item than we have on hand, you will be notified if the delay will be longer than 5 days.

    Backorder Policy >

Need a Sample

Fabric samples are $1.00 /EA

Free Shipping on Samples

Have a Question?

 

You may also be interested in:

Snap Fastener Installation Tool

#25204

 
Snap Fastener Deluxe Installation Tool

#100949

 
Pres-N-Snap Installation Tool

#109011

 
Pres-N-Snap One Way Fastener Die

#586325

 
SnapRite® Surface Mount Stud Die

#103754

 
Rubber Cutting Block 10" x 10"

#378100

 
Hole Cutter 1/8"

#102235

 

Description

Pull-The-Dot (One Way) Snap – Cloth-to-Cloth Stud is made of top-quality nickel-plated brass and is used for cloth-to-cloth applications. The Pull-The-Dot studs have a thin waist to securely lock the socket in place on three sides and an octagonal base. The stud rivets to a standard eyelet (sold separately) to create a locking snap that will only open from one side.

Pull-The-Dot cloth-to-cloth studs are used in conjunction with DOT eyelets. An installed button and socket can be snapped to the installed stud. For cloth-to-surface installations, use a Pull-The-Dot stud with an integrated screw.

Pull-The-Dot snap fasteners work well with applications where the snap must be placed at an angle where the fabric tension is high. Snap fasteners are excellent for covers, enclosures and more. All fasteners are highly resistant to corrosion.

Sold Each.

An installation tool is required.

Note: These studs can be used for cloth-to-surface applications when installed using a blind rivet and the SnapRite Surface Mount Stud Die.

Documents

Videos