Rod and Rafter Holder Awning Hardware

Item Number: 284103
Sale Unit: Each
 
This aluminum part was designed to anchor the awning head rod with the fabric wrapped around it (a sleeve must be made for the insertion of the 1/2" EMT head rod). The frame rafter is attached to the same fitting just below the head rod with an Eye End (sold separately). This Rod & Rafter Holder is for wood or brick.

If installing in cement use cement anchors and appropriate screws.

The correct pipe for the head rod is 1/2" EMT (Electrical Metallic Tubing).

  • Length - 3 5/8"
  • Width - 15/16"
  • Mounting holes 2 3/16" from centers
  • Sold Each
  • Related Items
    Head Rod Clamp Awning Hardware
    Sale Unit: Each
    Item Number: 281506
     
    Camel Back Hinges Awning Hardware
    Sale Unit: Each
    Item Number: 238020
     
    Slip Fit Eye Ends 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 282190
     
    Slip Fit Tie Down Clamp 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 281698
     
    Square Slip Fit Elbow 3/4" x 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 123397
     
    Slip Fit Front Bar Fitting 3/4" x 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 130580
     
    Jaw End with Lag Screw Awning Hardware
    Sale Unit: Each
    Item Number: 282204
     
    Pipe Clamp 3/4" Awning Hardware
    Sale Unit: Each
    Item Number: 112843
     
    Awnings Are Easy Book
    Sale Unit: Each
    Item Number: 100749
     
    How to Make a Loose Frame Awning Video
    Sale Unit: Each
    Item Number: 200387
    How to Make a Loose Frame Awning with a Scalloped Edge Video
    Sale Unit: Each
    Item Number: 200396
    How to Make a Square Frame Awning with Tie Down Bar Video
    Sale Unit: Each
    Item Number: 200393