Roller Shade Clutch Kit 72" Long has everything needed to create your own easy to use roller shades. Raise or lower a shade of up to 16 lbs. just by pulling the bead loop. Cut the aluminum shade roller to size (if needed), stick the fabric to the adhesive surface on the roller, and secure the brackets to the wall or ceiling. Construction time is less than 2 hours.
Roller Shade Clutch Kit 72″ Long Includes:
1 Clutch Unit
1 Pair of Brackets (inside, outside or ceiling mounted). 5/8"; Maximum clearance between roller and wall
6 ft. Aluminum Shade Roller (1-1/2" OD)
6 ft. Double Face Adhesive Tape
72″ Wood Slat
4 ft. Plastic Drop Bead Chain Loop
1 Drive Tension Device
We recommend using Phifertex Mesh or Phifertex Plus for roller shade material.
Warning: Always keep the chain loop secured to the Drive Tension Device and out of the reach of children.
Be the first to know about promotions, new products, or great how-to advice.
Any rights not expressly granted herein are reserved.
Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella® Plus, Sunbrella® Supreme, Sunbrella® Canvas, Sunbrella® Sling are registered Trademarks of Glen Raven, Inc. Lift-The-DOT®, Pull-The-DOT® and Common Sense® are registered Trademarks of Scovill Fasteners, Inc. YKK® is a registered Trademark of YKK CORPORATION in Japan and other countries/regions. Velcro® is a registered Trademark of Velcro Industries B.V. Sailrite®, Ultrafeed® and SnapRite® are registered Trademarks of Sailrite Enterprises, Inc.