Sailrite Professional Zigzag Commercial Walking Foot Sewing Machine Complete with Power Stand and 1/2 hp Clutch Drive Motor. The Professional Sewing Machine is a full size, rotary machine that features a powered Walking Foot similar to the Ultrafeed’s but with a large hook and bobbin mechanism to reduce the frequency of bobbin winding and allow for the use of very heavy thread. It sews a 5mm long straight stitch and a 10 mm wide zigzag stitch. Maximum sewing speed is 2500 stitches per minute. It has reversing capability.
Use the Professional for heavy materials and thick fabric assemblies as well as light to medium work. It is an excellent choice for everything from spinnakers to 10oz storm sails.
This Sewing Machine Includes:
40 assorted needles
1oz cone of thread
2 large capacity bobbins
Thread stand
Bobbin winder
Oil
Screw drivers
Support Pin
Deluxe seam ripper
Maintenance brush
Instructional video with an electronic Guidebook in PDF format.
K-Leg Commercial Stand Table
Clutch Motor w/ smaller 1 3/4" motor pulley to slow speed
Presser foot lifting treadle
Table light
Drawer
Foot treadle linkage
Rubber foot pads
Power Twist V-Belt
Guarantee: A Sailrite Professional Sewing Machine can be returned in 30 days for a full refund less 10% restocking fee and delivery. All parts (excluding needles, feed dogs, rotary hooks, throat plates, bobbins and belts) are fully guaranteed for two years. Labor for repairs is provided at no charge for two years, but our goal is to enable you to maintain and repair your own machine. If it must be returned for repair, you will be responsible for delivery both ways.
Professional Sewing Machine Specifications:
Shuttle: full rotary, gear driven
Weight: 79 lbs
Maximum sewing speed per min: 2500 stitches
Max. straight stitch length: 5mm
Max. zigzag width: 10mm
Needle System: 135 x 17
Bed size: 18.75" x 7"
Underarm space: 10.75" x 4"
Presser foot lift: hand lever 5/16″ / with foot lifting treadle 7/16″
Includes -- A Power Stand Complete with clutch drive 1/2 hp motor, presser foot lifting treadle, light, drawer, and rubber foot pads.
Commercial Stand Table This is the traditional way a commercial sewing machine is powered. It provides a very solid sewing platform on which to work. The table surface is 22" deep by 47" wide. Leg height is adjustable from 27 to 31 inches. The cutout for the machine head is 7 1/8" by 18 7/8".
