Screw Flat Head Wood 6 x 3/4" Stainless Steel

Item Number: 526100
Sale Unit: Each
 
Use these #6 x 3/4" Phillips flat head wood screws with our dodger and bimini frames and their fittings. Also for attaching rigging hardware. Flat head screws provide a flush surface when used in a countersunk hole. Use where clearance is important. Length is measured from top of head.
  • 18-8 Stainless Steel
  • Thread size #6
  • Drill size 5/64" (hard) 1/16" (soft)
  • Driver size #2
  • Head diameter .279"
  • Head height .083"
  • Head angle 82 degrees
Related Items
Screw Flat Head 6 x 1/2" Key II
Sale Unit: Each
Item Number: 777040
 
Screw Flat Head Tapping 8 x 3/4"
Sale Unit: Each
Item Number: 1408
 

Welcome to Sailrite! We have been having technical difficulties. If you have trouble ordering, please use our live help, or give us a call at 800.348.2769 Mon – Fri, 8am - 5pm EST/EDT

Any rights not expressly granted herein are reserved.

Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella Plus, Sunbrella Supreme, Sunbrella Canvas are registered Trademarks of Glen Raven, Inc. Lift-The-DOT©, Pull-The-DOT©, Common Sense© and Pull-It-Up™ are registered Trademarks of Scovill Fasteners, Inc. Velcro® is a registered Trademark of Velcro Industries B.V. Ultrafeed™ and Sailrite™ are registered trademarks of Sailrite Enterprises, Inc.

Copyright ©2011 www.sailrite.com