A specially designed eye which eliminates the need for threading. It locks in place with a handy set screw allowing roughly 1/2 inch adjustment in or out.
Use with appropriately sized rod or pipe. For 1/2" rod or 1/4" galvanized pipe.
Note: 1/4" Galvanized Pipe is 1/2" outer diameter.
Measurements:
Opening diameter: 9/16"
Opening depth: 1" (allows for about a half inch adjustment for pipe)
Overall Length: 2 1/8"
Hole diameter for bolt: 1/4"
Overall diameter: 3/4"
