This Table Top and Stand is a more convenient stationary work center for your Ultrafeed machine. Measuring 20" deep and 48" wide, this table top has a cut out section with hinges that allows you to slip the Ultrafeed out of its case and directly onto the table top. The leg height is adjustable from 28 to 32 inches. An adhesive yard stick ruler is fastened to the front table edge and there is a handy drawer for storage. Drawer dimensions: 12.5" long, 4.25 inches wide, 2.25 inches deep. Table is also fashioned with a pre-drilled hole for an optional light. Table is sent unassembled with step by step directions for easy construction.
Note: This is an industrial table top and stand and there will be paint imperfection on the steel legs and the underside of the table is unfinished fiberboard.
Table Top & Stand for Ultrafeeds is a railroaded pattern
Reduce Seaming with Railroaded Fabric
Most upholstery fabric is 54 inches wide and, if it features a pattern, the pattern is run down the length of the bolt. When upholstering, it generally looks best to run a patterned fabric from the top to the bottom of the piece and from the back to the front. This requires seams every 54 inches on larger pieces like sofas and long boat cushions. Alternatively, a Railroaded fabric pattern can be used to eliminated unwanted seams. The patterns in Railroaded Sunbrellas run across their widths. This makes Railroaded Sunbrella perfect for these longer projects.
In this illustration, the fabric rolls out to cover the cushions without need for a seam.
This is a photo example of the railroaded fabric coming off the roll.
This is a photo example of fabric that is not railroaded coming off the roll.
In this illustration the fabric rolls out vertically, and for this type of single cushion, would require several seams to cover the couch.
