Protect fabric from ultraviolet light and restore water repellency.

303 Fabric Guard is best applied in two light applications instead of one heavy dose. Choose a warm day (50 to 105 degrees F) and spray in a well ventilated area. Avoid heat, sparks, smoking or open flame during application (303 Fabric Guard is flammable until dry). Also avoid contact with skin and eyes (protective clothing is recommended).

Before application, test the colorfastness of the material or carpet by spraying in an inconspicuous area and wiping the area while wet to see if the color transfers. Spray evenly holding the nozzle tip 8 to 12 inches from the material. Only mist the exposed side of your material. Allow the solvent to evaporate between applications. On fabrics the final application should dry and cure for 8 to 12 hours. When used on carpeting, a 12 to 24 hour drying period is best.

Try to not get over spray on wood finishes, vinyl, plastics and metals. Any over spray should be wiped up immediately with a dry absorbent cloth.

303 Fabric Guard Provides:
  
Excellent water and oil repellency and superior stain resistance and soil release characteristics. It also controls fading and resists mildew formation. It does not alter the color, feel, or breathability of fabrics like Sunbrella. It is environmentally safe with no ozone depleting solvents and it is non-toxic and odorless when dry.

Coverage:

A 15.2 oz can of 303 Fabric Guard covers up to 100 square feet on most fabrics. A gallon covers up to 1000 square feet if applied with proper equipment (a low volume airless spray system equipped with an even flat fan tip is recommended). Other applicators such as paint sprayers and hand pumped garden sprayers can be used but coverage will diminish.