You’re most likely familiar with 303® Fabric Guard – designed to keep your outdoor fabrics water repellent and stain resistant. But now, there’s a product to keep your indoor fabrics protected too! So whether you have kids, pets, are hosting your next wine tasting or anything else, be sure to use 303® Stain Guard for Indoor Fabrics for the ultimate protection! 303 Stain Guard for Indoor Fabrics helps prevent stains and repel liquids caused by: food, wine, soda, juice, kids, pets and everyday dirt and mud. This product is rated for interior use. It is even recommended by the makers of Sunbrella®, for use to restore lost stain resistance on their fabrics.
Usage Directions: Use only on thoroughly clean, dry fabrics. Apply with all windows open, at temperatures of 55°F or higher. Spray the product onto fabric surface until evenly wet, overlapping sprayed areas in a crisscross pattern to ensure the entire area has been treated. Do not over saturate. Let the treated surface completely dry/cure 12-24 hours before using. For best results, we recommend re-treating every 30-45 days, or as needed. Pour water onto fabric to determine the need to retreat – if the product soaks into fabric, it is time to re-treat. COVERAGE: 40-75 sq ft. (3.7-7 sq.m) per 16 fl oz., depending on material and application method.
Note: This product is NOT a water-proofing product, it is a stain preventer. For best results, spills should be blotted up as quickly as possible.
WARNING: Do not use this product on vinyl, plastics, rubber, fiberglass, or finished leather. Protect these and other surfaces from overspray while using. Wipe up overspray immediately.
- 303 Indoor Stain Guard was specifically designed to protect interior fabrics like couches, chairs and carpeting.
- Helps prevent stains and repels liquid on interior fabrics.
- Protects your interior fabrics from day to day dirt and mud.
- Unlike other products on the market, 303 Stain Guard is non-flammable, and has no harmful fumes.
- Made in the USA.
|Certifications:||California Prop 65 Compliant|
|Coverage:||40-75 square feet per 16 fl oz., (no soaking required), depending on material and application method|
|Dry Time:||12 to 24 hours|