Sew it yourself! C&C 24 100% Working Jib Sail Kit lets you make your own jib sail. This crosscut kit is made from 6.4oz white Supercruise Dacron® using the designer's plans and features a rope reinforced luff, #1 brass hanks on the luff, and leechline.
Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #1 Spur Die Set for grommet installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Sail Kit Includes:
- 6.4oz Supercruise Dacron® Sailcloth, patterned and pre-cut
- V-92 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin (for hand sewing)
- Pearl Grey 2-3oz Leather
- Folded Dacron® 2-inch Tape (Non-adhesive backed)
- Folded Dacron® 3-inch Tape (Non-adhesive backed)
- 3-Strand Polyester Rope
- #1 Spur Grommets
- 1-inch Webbing
- Gransegel Cleat Large
- #1 Jib hanks
- Stainless Steel Thimbles
- Stainless Steel Ring 1-¼-inch
- Stainless steel rings 1 inch
- Adhesive Sailrite Logo
Also required (sold separately):
- #1 Spur Die Set
|Luff:||26 feet, 3 inches|
|Leech:||22 feet, 8 inches|
|Area:||134 square feet|