You may also like
Sew it yourself! C&C 27 MK V 95% Blade Jib Sail Kit lets you make your own jib sail. This crosscut kit is made from 6.4 oz. Supercruise Dacron® using the designer's plans and features a rope-reinforced luff, #1 brass hanks on the luff, and leechline, 4 leech battens.
Computer plotted with seaming lines plotted right on the cloth. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #1 Spur Die Set for grommet installation (sold separately). All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Sail Kit Includes:
- 6.4oz Supercruise Dacron® Sailcloth, patterned and pre-cut
- White V-92 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin
- Pearl Grey Leather
- Dacron® 2" Folded Tape (non-adhesive backed)
- Dacron® 4" Folded Tape (non-adhesive backed)
- Classic 3-Strand White Polyester Rope
- 4 leech battens
- Stainless Steel Thimbles
- Round Stainless Steel Rings 1-¼"
- 1" Polyester Webbing
- 2" Polyester Webbing
- D-ring with bar
- #1 Brass Swedish Snaps
- #1 Spur Grommets
- Gransegel Cleat Large
- Adhesive Sailrite Logo
Also Required (sold separately):
- #1 Spur Die Set
|Foot:||10 feet, 7.5 inches|
|Leech:||31 feet, 11 inches|
|Area:||173 square feet|