Sew it yourself! Cal 20 155% Genoa Sail Kit lets you make your own jibsail. This crosscut kit is made from 4oz white Dacron® using the designer's plans and features leechline and brass hanks on the luff.
Computer plotted with seaming lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #0 Spur Die Set for luff grommet installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
- 4oz White Dacron® Sailcloth, patterned and pre-cut
- White V-69 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- Stainless Steel Thimble
- 5-ply Waxed Twine Bobbin
- Pearl Grey Leather
- Folded Dacron® 1-½-inch Tape (Non-adhesive backed)
- Folded Dacron® 3-inch Tape (Non-adhesive backed)
- 3-Strand White Polyester Rope
- 1-inch White Polyester Webbing
- Gransegel Cleat
- 1-¼-Inch Stainless Steel Ring
- #0 brass hanks
- #0 Spur Grommets
- 1" SS Rings
- Adhesive Sailrite Logo
Also Required (Sold Separately):
- #0 Spur Die Set
|Foot:||12 feet, 0.5 inches|
|Leech:||19 feet, 11 inches|
|Area:||121 square feet|