Cal 25 Working Jib Sail Kit
SKU: 402912
1 Available


Sew it yourself! Cal 25 Working Jib Sail Kit lets you make your own jib sail. This crosscut kit is made from 6.4oz white Dacron® using the designer's plans and features a rope reinforced luff, #1 brass hanks on the luff, and leechline. Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!

Construction requires a #1 Spur Die Set for grommet installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!

Each Sail Kit comes with complete written instructions.

Sail Kit Includes:

  • 6.4oz White Dacron® Sailcloth, patterned and pre-cut
  • V-92 Polyester Thread
  • Seamstick Basting Tape
  • #16 Hand Sewing Needle
  • 5-ply Waxed Twine Bobbin (for hand sewing)
  • Pearl Grey 2-3oz Leather
  • Folded Dacron© 2-inch Tape (Non-adhesive backed)
  • Folded Dacron© 3-inch Tape (Non-adhesive backed)
  • 3-Strand Polyester Rope
  • Dacron© Leechline
  • #1 Spur Grommets
  • 2-inch Webbing
  • Gransegel Cleat Large
  • #1 Brass hanks
  • Stainless Steel Thimbles
  • Round Stainless Steel Ring 1-¼-inch
  • #3 D-Ring with Bar
  • Adhesive Sailrite Logo
  • Instructions

Also required (sold separately):

  • #1 Spur Die Set


Luff: 28 feet
Foot: 13 feet, 5 inches
Leech: 22 feet, 9 inches
Area: 149 square feet


Offline viewing of PDF documents requires Adobe Reader.

Download Adobe Reader >


We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769