Chameleon Sail Data

# X-SD-6028

Sailboat Description

The Chameleon was designed by Danny Greene as tender for a larger vessel. The Chameleon is a nesting dinghy that can be launched a piece at a time for convenience. There are two rowing positions so the boat can be trimmed with up to three people on board.

LOA 10'4"
Beam 4'2"
Hull weight 100 lbs
Sail area @50 square feet
Motor 2-4 HP
Nested Dimensions 5'4" x 4'2" x 1'8"

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length10 ft
Source of DataDesigner: Danny Greene

Sail Data


Comments11 luff grommets for lacing sail to mast with 1/8" line, including head and tack

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.