Sew it yourself! Chrysler 26 110% Jib Sail Kit lets you make your own jib sail. This crosscut kit is made from 6.4oz white Supercruise Dacron® using the designer's plans and features a rope reinforced luff, brass hanks on the luff, and leechline.
Computer plotted with seaming lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #1 Spur Die Set for grommet installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Sail Kit Includes:
- 6.4oz White Supercruise Dacron® Sailcloth, patterned and pre-cut
- White V-92 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin (for hand sewing)
- Pearl Grey 2-3oz Leather
- Folded Dacron® 2-inch Tape (Non-adhesive backed)
- Folded Dacron® 4-inch Tape (Non-adhesive backed)
- 3-Strand Polyester Rope
- #1 Spur Grommets
- 2" Polyester Webbing
- Gransegel Cleat Large
- #1 brass hanks
- Stainless Steel Thimbles
- Round Stainless Steel Rings 1-¼-inch
- D-ring with bar
- Adhesive Sailrite Logo
Also required (sold separately):
- #1 Spur Die Set
|Foot:||12 feet, 6 inches|
|Leech:||24 feet, 6 inches|
|Area:||150 square feet|