Sew it yourself! Clipper 21 100% Working Jib Sail Kit lets you make your own jib sail. This crosscut kit is made from 5.4 oz. Supercruise Dacron® using the designer's plans and features brass snaps on the luff and leechline. Computer plotted with seaming lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #0 Spur Die Set for grommet installation (sold separately). All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Sail Kit Includes:
- 5.4oz Supercruise Dacron® Sailcloth, patterned and pre-cut
- White V-69 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin
- Pearl Grey Leather
- Dacron® 1-½" Folded Tape (non-adhesive backed)
- Dacron® 3" Folded Tape (non-adhesive backed)
- Classic 3-Strand White Polyester Rope
- Stainless Steel Thimbles
- Round Stainless Steel Rings 1-¼"
- 1" Polyester Webbing
- #0 Brass Snaps
- #0 Spur Grommets
- 1" SS Rings
- Gransegel Cleat Small
- Adhesive Sailrite Logo
Also Required (sold separately):
- #0 Spur Die Set
|Luff:||19 feet, 9 inches|
|Foot:||10 feet, 3.5 inches|
|Leech:||16 feet, 10 inches|
|Area:||86 square feet|