EverSoft White 54" Perforated Foam Backed Headliner

EverSoft Perforated Foam Backed Headliner is a vinyl headliner backed with foam for a great-looking, high-end headliner installation. EverSoft vinyl has a supple feel and luxurious look that will add a high-quality atmosphere to your boat or RV. The 1/4-inch foam backing is antimicrobial so it won’t mold or mildew. The perforated vinyl allows air to circulate between the layers, eliminating moisture buildup due to temperature changes.

Perfect for renovating any boat interior, this vinyl headliner is easy to sew and install. Foam backed headliners hide imperfections better than vinyl alone, and the foam can be cut away to accommodate protrusions like nuts and bolt heads. You can also use foam backed headliner for certain upholstery projects, such as automotive and RV doors and center consoles. It can also be used for side panels and steering consoles on a powerboat or sailboat.

To install, apply 3M™ General Trim Adhesive to both surfaces. Do not use a water based cement or silicone based spray with this headliner. Cut the headliner slightly oversized and then trim to fit.

In the manufacturing of this product, sheets of vinyl are spliced together on the foam backing. Rolls of 8 or more yards may contain one splice. If you will be working on large spans, we recommend ordering up to 20% more fabric than needed to easily work around these splices.

Pro Tip: It is not recommended to use masking tape on either surface of this headliner fabric.

Shipping Notice: The maximum continuous piece that can be shipped is 15 yards. Orders over 15 yards will be shipped in multiple rolls.