28000 lbs displacement, junk rigged schooner, 56' with bowsprit and davits.
Semi-custom sailplan w/ mainsail smaller than orig. and foresail larger, to achieve better balance
Are you interested in sewing a custom sail?
Popular Sail Kits
We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat
models as well as smaller, high-production boats.
Browse Products for this Boat on the right
to see if there is a popular sail kit available for
If you don't see the sail you're looking for, we can also create a custom sail kit!
|Builder/Designer||Thomas E. Colvin|
|Source of Data||Owner Measurements|
|Comments||Largest practical asymmetrical cruising chute|
|Comments||Large drifter / Mule for between the masts area. Tack must be tacked to windward side.|
|Comments||Original Tom Colvin flat-panel junk foresail|
|Comments||Semi-custom junk foresail made with batten-shelf technique|
|Comments||Semi-custom junk mainsail made with batten-shelf technique|
|Comments||Original Tom Colvin flat-panel junk mainsail|
|Comments||Overlapping Genoa, comes to aft fore-shroud|
|Comments||Jumbo Genoa for light air|
|Comments||Orig Tom Colvin jib|
|Comments||This is the fisherman staysail|
*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E,
and P). These data points should be carefully checked. More
Please Note: Most of our sail dimensions are based on class rules, designer blueprints,
or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all
uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain
All dimensions are intended to be maximum and smaller sails are not wrong.
We've limited our listing to the sails most commonly used, but these are not the only ones
appropriate for a given boat.