Sew it yourself! Glen L 17 Jib Sail Kit lets you make your own jibsail. This crosscut kit is made from 4.4oz. Supercruise Dacron® using the designer's plans and features a wire luff, #0 brass hanks on the luff, leechline.

Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!

Construction requires a #0 Spur Die Set for luff grommets. All other supplies to build your sail are included; all you need are scissors and a sewing machine!

Each Sail Kit comes with complete written instructions.

Sail Kit Includes:

  • 4.4oz Supercruise Dacron® Sailcloth, patterned and pre-cut
  • V-69 Polyester Thread
  • Seamstick Basting Tape
  • #16 Hand Sewing Needle
  • 5-ply Waxed Twine Bobbin
  • 2-3oz Pearl Grey Leather
  • Stainless Steel Thimble
  • Folded Dacron® 1-½-inch Folded Tape (non-adhesive backed)
  • Folded Dacron® 4-inch Folded Tape (non-adhesive backed)
  • Stainless Steel Wire Rope
  • Dacron© Leechline
  • Stainless Steel Round Ring
  • #3 Brass Rings
  • 3/4" Webbing
  • #0 Spur Grommets
  • #0 brass jib hanks
  • Nicopress Sleeves
  • Gransegel Cleat Small
  • Adhesive Sailrite Logo
  • Instructions

Also Required (Sold Separately):

  • #0 Spur Die Set


Luff: 16 feet
Foot: 8 feet, 8 inches
Leech: 13 feet, 5.25 inches
Area: 59 sq. ft.


Offline viewing of PDF documents requires Adobe Reader.

Download Adobe Reader >


We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769