This kit is a standard size Cam-Matic® cam cleat with a X-Treme Angle Fairlead from Harken®. Cam-Matic cleats are hardcoat-anodized cam cleats that include ball bearings and are used for continual adjustment applications. X-Treme Angle Fairleads accommodate situations where the lead to the cleat is very abrupt and allows releasing and re-cleating at angles up to 90 degrees to the cleat. Featuring low-friction, angled stainless steel line guides on the exit side of the cleat, use this kit for fast spinnaker take-downs during mark roundings or anywhere fast release is crucial.
Features:
- Includes: Harken 150 Standard Cam-Matic® Cleat and Harken 375 Standard X-Treme Angle Fairlead
- UV-Stabilized, Carbon-Black Delrin® Ball Bearings in Cam Cleat
- Holds Lines Securely, Releases Instantly
- Aluminum Pawls
- Hardcoat-Anodized for High-Load, High-Wear, and Continuous Adjustment Applications
- Tough, Abrasion-Resistant Composite Fairlead
- Allows Releasing and Recleating at Angles up to 90° to the Cleat
Specifications
| Sale Unit: | EA |
|---|---|
| Length: | 2-9/16 inches (65 mm) |
| Color: | Black |
| Weight: | 4.42 ounces (127 g) |
| Brand: | Harken |
| Cam Cleat Height: | 1-3/16 inches (30 mm) |
| Fairlead Height: | 2-1/4 inches (57 mm) |
| Fairlead Height Above Cam: | 15/16 inch (24 mm) |
| Cam Cleat Width: | 1-1/4 inches (32 mm) |
| Fairlead Width: | 1-13/16 inches (46 mm) |
| Minimum Line Diameter: | 1/8 inch (3 mm) |
| Maximum Line Diameter: | 1/2 inch (12 mm) |
| Fastener Spacing: | 1-1/2 inches (38 mm) (Center-to-Center) |
| Fasteners: | #10 Flat Head (5 mm) (Fasteners Not Included) |
| Breaking Strength: | 750 pounds (340 kg) |
| Maximum Working Load: | 300 pounds (136 kg) |
| Pawls Material: | Aluminum |
| Wedge Included: | No |
