Sew it yourself! Haven 12-1/2 Jib Sail Kit lets you make your own jibsail. This crosscut kit is made from 4 oz. white Dacron® panels using designer Joel White's plans and includes a wire luff, nylon hanks on the luff, two RBS tapered leech battens, and grommets for lacing on the foot. Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!

Construction requires both #1 and #5 Spur Die Sets for setting foot and clew grommets. All other supplies to build your sail are included; all you need are scissors and a sewing machine!

Each Sail Kit comes with complete written instructions.


  • 4oz White Dacron© Sailcloth, patterned and pre-cut
  • White V-69 Polyester Thread
  • Seamstick Basting Tape
  • #16 Hand Sewing Needle
  • 5-ply Waxed Twine Bobbin
  • Pearl Grey Leather
  • Stainless Steel Thimble
  • Folded Dacron© 3-inch Tape (Non-adhesive backed)
  • Folded Dacron© 4-inch Tape (Non-adhesive backed)
  • Dacron© 2-inch Tape (Non-adhesive backed)
  • Stainless Steel Wire Rope
  • RBS tapered E-glass batten set
  • #1 Spur Grommets
  • #5 Spur Grommets
  • Nylon Hanks
  • Nicopress Sleeves
  • Adhesive Sailrite Logo
  • Instructions

Also Required (Sold Separately):

  • #1 Spur Die Set
  • #5 Spur Die Set


Luff: 12 feet
Foot: 4 feet, 7 inches
Leech: 10 feet, 5 inches
Area: 26 sq. ft.


Offline viewing of PDF documents requires Adobe Reader.

Download Adobe Reader >


We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769