Sew it yourself! Mariner 19 Jib Sail Kit lets you make your own jibsail. This kit is made from 5.4oz white Dacron® using the designer's plans and features two leech battens, a pre-stretched rope and brass hanks on the luff, leechline and a D-Ring in the clew. Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!

Construction requires a #0 Spur Die Set for jib snap installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!

Each Sail Kit comes with complete written instructions.


  • 5.4oz White Dacron© Sailcloth, patterned and pre-cut
  • White V-69 Polyester Thread
  • Seamstick Basting Tape
  • #16 Hand Sewing Needle
  • 5-ply Waxed Twine Bobbin
  • 2-3oz Pearl Grey Leather
  • Leechline with cleat
  • Dacron© 1-½-inch Tape (Non-adhesive backed)
  • Dacron© 2-inch Tape (Non-adhesive backed)
  • Dacron© 3-inch Tape (Non-adhesive backed)
  • 3-Strand White Polyester Rope
  • Battens
  • 1-inch White Webbing
  • #0 Brass Hanks
  • #0 D-Ring without Bar
  • #0 Spur Grommets
  • Stainless Steel Thimble
  • #3 Brass Rings
  • Adhesive Sailrite Logo
  • Instructions

Also Required (Sold Separately):

  • #0 Spur Die Set


Luff: 17 feet, 9 inches
Foot: 7 feet, 10 inches
Leech: 15 feet, 10 inch
Area: 66 sq. ft.


Offline viewing of PDF documents requires Adobe Reader.

Download Adobe Reader >


We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769