Nutshell Pram 7'7 Sail Data

# X-SD-6626

Sailboat Description

The Nutshell Pram 7 foot 7 inch is a glued lapstrake plywood pram. This Joel White design has substantial transoms at both ends meaning it has considerable carry capacity.

This home built dinghy is typically built from standard plywood panels without joining the sheets by scarfing or with butt straps.

Nutshell Pram beam is 4', Draft with daggerboard up is 5 inches (down is 21 inches). Weight is about 90 pounds. Sail area is 37 square feet.

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length8 ft
Builder/DesignerJoel White
Source of DataDesigner/Builder Sailplan

Sail Data


CommentsLaced to lug. Foot and luff are loose.

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.