O'Day Mariner 19 Jib Sail Kit
SKU: 295541
Non-Returnable
You may also like
Description
Sew it yourself! O'Day Mariner 19 Jib Sail Kit lets you make your own jibsail. This kit is made from 5.4oz white Dacron® using the designer's plans and features two leech battens, wire reinforced luff and brass hanks on the luff, and a D-Ring in the clew. Computer plotted with seaming and hem lines plotted right on the cloth. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #0 Spur Die Set for jib snap installation. All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Includes:
- 5.4oz White Dacron© Sailcloth, patterned and pre-cut
- V-69 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- Stainless Steel Thimble
- 5-ply Waxed Twine Bobbin
- 2-3oz Pearl Grey Leather
- Dacron© 1-½-inch Tape (Non-adhesive backed)
- Dacron© 2-inch Tape (Non-adhesive backed)
- Dacron© 4-inch Tape (Non-adhesive backed)
- 3/32" luff wire
- Battens
- 3/4-inch Polyester Webbing
- #0 Brass Hanks
- #0 D-Ring without Bar
- #0 Spur Grommets
- #3 Brass Rings
- Adhesive Sailrite Logo
- Instructions
Also Required (Sold Separately):
- #0 Spur Die Set
Specifications
| Luff: | 17 feet, 10 inches |
|---|---|
| Foot: | 7 feet, 10 inches |
| Leech: | 15 feet, 10 inch |
| Area: | 66 sq. ft. |
