Complete Guide to Setting the Feet Height & Range
Details
Details
This video provides a demonstration on how to recognize an improper setting of the Foot Height & Range of Motion. It will then guide you in making the adjustments listed below
- •Setting Foot Height (maximum height shown)
- •Setting Fore & Aft position
- •Range of Motion
Procedures shown in detail include the following
- •Loosen the set screw on the center shaft (which frees the center foot)
- •Loosen the set screws on the outer foot (which frees the outer foot)
- •Loosen the set screws on the Presser Bar Actuator Feed Rocker (controls Fore and Aft movement of the walking foot)
- •How to position the Presser Bar Actuator (About 2 degrees angled Aft once needle bar is all the way up)
Below are the relevant schematic pages for this sewing machine solution. Please use them as a reference while making adjustments on the machine.
Note: This video is not searchable on the Sailrite website. The URL link (web address) is usually given out via a Sailrite Support Case. To access this video again in the future you must use this same URL link.