You may also like
Standard 1-Bow for 7/8” Aluminum Frame is a replacement bow for an existing bimini or dodger. This adjustable frame is made from anodized aluminum tubing with a Brite finish and includes aluminum splines and rivets. All tubing bows are pre-bent at Sailrite on our custom jig. To reduce shipping costs and allow for greater customization, the bows are cut just beyond each edge, creating three sections—two curved and one crowned. The crown in the center bow increases rigidity and improves the appearance of the finished cover. Assemble the three pieces by inserting the aluminum splines and riveting in place.
Please Note: This kit does not include webbing support straps or fittings. A riveting gun and a tube cutting tool or hacksaw (blade 24 teeth/inch) will be required for assembly.
|Tubing Diameter:||7/8 inch|
|Tubing Wall Thickness:||0.058 inch|
|Bend Radius:||6 inches|
*Crown & fittings will add approximately 3"-5" to height
- Adding this item to your shopping cart will eliminate the Post Office as a shipping selection.
- Adding this item to your shopping cart will eliminate any air transportation shipping methods.
Item is as described; you cut it to fit your application. The angles of the bends are correct and the top bow piece is designed to match OEM. Good product.
Great service once again! Even before I made the order, as I contemplated the specifics of my project, I received excellent and copious good advice oabout my project from SailRite's tech assistance dept. Then when I made the order, it went through flawlessly.