Tenax® Pull It Up Fastener Stud with Long Thread is the 2-part lower section, or male part, of the Tenax system. This includes both the Threaded Stud and the Toothed Washer to make a complete lower section stud (you will receive them screwed together). Made from nickel-plated brass, ensuring that it will not rust, Tenax is ideal for use in marine environments. Additionally, the heavy-duty construction of the fastener ensures that it will perform snap after snap on difficult applications. This longer threaded version is made to accommodate thicker fabric assemblies than the standard Tenax stud. The long thread on this fastener accommodates a cloth-to-cloth thickness of up to 5mm of fabric.
Tenax is a unique type of snap fastener with a releasable, self-retention securing feature. Once the two parts have been pressed together, the upper and lower sections are joined so tightly that they cannot be separated without actuating the lock release. Tenax is particularly suitable for applications where quick and easy release, along with a secure grip in service, are required.
To Install: Pierce the cloth at the installation point. Unscrew the Toothed Washer with the inside thread from the Tenax Threaded Stud lower section. From the underneath side of the cloth, insert the lower section with the Threaded Stud into the hole in the cloth. Screw the Toothed Washer on loosely from above. Hold the cloth steady and screw down the lower section from the underside of the cloth using the Tenax Locking Key, #3630002 (sold separately).
Please Note: This is the German Tenax version and is not compatible with the English Tenax products.
|Hardware Material:||Brass, Metal, Nickel Plated|