Tetra Sail Data

# X-SD-4822

Sailboat Description

The Steve Redmond designed Tetra is an excellent sailing and rowing dinghy. The easy to handle sprit rig makes set up and take down easy and the spars fit right in the boat.

LOA 9'8"
Beam 3'6"
Hull weight 80 lbs
Sail area 37 sq.ft.

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length9 ft
Builder/DesignerSteve Redmond
Source of DataDesigner/Builder Sailplan

Sail Data


CommentsVertcal cut panels, brailing grommet 4'5" down from Peak

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.