Wr16 Sail Data

# X-SD-10663

Sailboat Description

Tri Radial cut design

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length16 ft
Builder/DesignerJim Brown
Source of DataDesigner/Builder Sailplan

Rig Dimensions

I
n/a
J
n/a
P
20ft
(6096mm)
E
7.75ft
(2362mm)
I2/P2
n/a
J2/E2
n/a

Sail Data

Main (Sleeve Luff)

Luff20.3ft
Foot9ft
Leech21.92ft
Headn/a
Clew-Throatn/a
Stayn/a
CommentsVertical battens, Tri - radial, Mylar traced spectra full roach curve Leach pannel(projected sans battens), Cunningham grommet

Main (Square Head)

Luff20.3ft
Foot9ft
Leech21.92*ft
Head1.83ft
Clew-Throatn/a
Stayn/a
Commentsdiagonal top batten, four full below, open top zippered 4/5 luff,head lift riveted plate,two cunningham grommets, top grommet 6"above bottom batten,8 reef tie small grommets at points along bottom batten double layer.

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.