Common Sense 2 Screw Stud Double High Key GG

Item Number: 777035
Sale Unit: Each
 
This Double High Stud 2 screw flat base is taller than the normal stud used in common sense "twist-lock" fasteners. Use it where extra height is needed to fit 2 eyelets over the twist lock stud. Made from nickel-plated brass - specially suited to the marine environment. Screws sold seperately. Sold Each.
Measurements:
  • Hole center to center = 7/8"
  • Hole size = 5/32"
  • Base length = 1 1/4"
  • Base width = 7/16"
  • Height of stud from mounting base = 13/16"
    • Common Sense Stud With 2 Screw Base / 2 Button Installation
    Various tools used to install the stud - 2 screw - to fabric applications.
    Different Studs - Explained
    Shows all the studs and different ways to install them in fabric and on hard surfaces.
    Related Items
    Screw Flat Head 6 x 1/2" Key II
    Sale Unit: Each
    Item Number: 777040
     
    Dot Common Sense Fastener Eyelet
    Sale Unit: Each
    Item Number: 777005
     
    Common Sense Washer Key BB
    Sale Unit: Each
    Item Number: 777010
     
    Common Sense 2 Prong Stud Key CC
    Sale Unit: Each
    Item Number: 777015
     
    Dot Common Sense Fastener Clinch Plate
    Sale Unit: Each
    Item Number: 777020
     
    Dot Common Sense Fastener 2 Screw Stud
    Sale Unit: Each
    Item Number: 777030
     
    Dot Common Sense Fastener 5/8" Screw Stud
    Sale Unit: Each
    Item Number: 777025
     

    Welcome to Sailrite! We have been having technical difficulties. If you have trouble ordering, please use our live help, or give us a call at 800.348.2769 Mon – Fri, 8am - 5pm EST/EDT

    Any rights not expressly granted herein are reserved.

    Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella Plus, Sunbrella Supreme, Sunbrella Canvas are registered Trademarks of Glen Raven, Inc. Lift-The-DOT©, Pull-The-DOT©, Common Sense© and Pull-It-Up™ are registered Trademarks of Scovill Fasteners, Inc. Velcro® is a registered Trademark of Velcro Industries B.V. Ultrafeed™ and Sailrite™ are registered trademarks of Sailrite Enterprises, Inc.

    Copyright ©2011 www.sailrite.com