Shackle Snap-In Plastic 7/8" is a plastic shackle used to secure a slug or slide to a sail. This shackle is injection molded from a tough nylon to absorb sudden impact loads and has a self-locking snap-in pin to withstand greater loads. The pip prevents the shackle from jamming and keeps the sail slug or slide from abrading the boltrope. The unique snap design is often preferred as an easier to fit alternative with higher strength and reduced elongation under load. Sail shackles are popular due to their quick installation time. This shackle must be used with a pressed #1 or #2 spur grommet in the edge of the sail. Plastic or nylon shackles do not need a plastic insert to protect the sail.
Snap in Plastic Sail Shackles - Requires a Grommet
This shackle has a self-locking snap-in pin to withstand greater loads. The pip prevents the shackle from jamming and keeps the sail slug or slide from abrading the boltrope. This shackle must be used with a pressed #1 or #2 spur grommet in the edge of the sail.
Spacing Slugs or Slides on Mainsail
Shows how to properly space slugs or slides on the luff and foot of a mainsail.
Be the first to know about promotions, new products, or great how-to advice.
Any rights not expressly granted herein are reserved. Sunbrella®, SurLast®, Firesist HUV® and Glen Raven®, Sunbrella® Plus, Sunbrella® Supreme, Sunbrella® Canvas, Sunbrella® Sling are registered Trademarks of Glen Raven, Inc. Lift-The-DOT®, Pull-The-DOT® and Common Sense® are registered Trademarks of Scovill Fasteners, Inc. YKK® is a registered Trademark of YKK CORPORATION in Japan and other countries/regions. Velcro® is a registered Trademark of Velcro Industries B.V. Sailrite®, Ultrafeed® and SnapRite® are registered Trademarks of Sailrite Enterprises, Inc.