CushionRite® Flotation Antimicrobial Foam (Extra Firm)

Made in the USA!

CushionRite® Flotation Antimicrobial Foam (Extra Firm) is a closed cell PVN seating foam with antimicrobial properties. CushionRite Flotation is an excellent choice for flotation gear and marine cushions. Choose CushionRite Flotation Foam for cockpit cushions, life jackets, bosun's chairs or anywhere a firm, thin cushion is needed. It can also be used as the bottom layer when layering mattress foam.

Glue pieces of foam together with adhesive to form custom foam shapes and sizes and to reduce waste.

Flotation foam may shrink up to 5% over time, especially in colder weather. Note that thicker foams tend to be more stable than thinner foams.

The Sailrite® Blade Foam Saw expertly cuts through a full range of seating foam types. A standard electric kitchen knife can also be used, though the results won’t look as professional. To glue two pieces of foam together, Sailrite recommends using spray adhesive. Foam can also be glued on the sides to make a wider piece or layered to make thicker cushions.

Please Note: Sheet size can vary up to 2 inches in length and 1 inch in width.

Important: Items are compressed for shipping; we recommend unrolling as soon as possible. Compressed foam takes up to a week to regain its original size and shape. Allow foam to fully decompress before cutting or using in a project.

Features:

• Extra-firm, marine flotation foam.
• Antimicrobial—prevents the growth of mold and mildew.
• Recommended for flotation gear and cockpit cushions.

Item Specifications:

• Compression Resistance (PSI) at 25%: 1.5-3.5
• Shrinkage: 3%-5%
• Water Absorption Max Weight Change: 7%
• Temperature Range: -30 F to 200 F