Wire-Hung Canopy Snap Clip Assembly (2 pack)
SKU: 126965
Wire-Hung Canopy Snap Clip Assembly (2 pack)
SKU: 126965
Price per 2 Pack
Available: 214
$25 Off $250+
$60 Off $500+
$200 Off $1,500+
$450 Off $3,000+
Use Code: STACKUP
Ends 5/17/25, at 8 a.m. ET.
Use this snap clip assembly during the installation of a wire-hung canopy system. With this system, each fabric panel can be opened and closed independently.
Description
Install this snap clip assembly during the setup of a wire-hung canopy system. The snap clip attaches to the flange of the 180-degree awning track using a bolt, spacers and a locknut. A 1/4" hole should be drilled in the flange for each snap clip installation. The snap clip enables the hanging of fabric wire-hung canopy panels on a stainless steel wire cable and allows them to slide easily along the wire for opening or closing the canopy panels. It provides easy hanging and facilitates a quick removal of fabric panels using snap clips.
What's Included:
- Fixed Eye Snap Clip 2" (Stainless Steel) — 2
- Screw Pan Head Phillips 1/4"-20 x 3/4" Stainless Steel — 2
- Nylon-Insert Locknut 1/4"-20 Stainless Steel — 2
- Delrin® Washer — 2
- Unthreaded Spacer Nylon 1/2" — 4
Specifications
| Brand | Unbranded |
|---|---|
| Hardware Material | DelrinNylonPlasticStainless SteelStainless Steel Grade 316 |
Dimensions
Fixed Eye Snap Clip 2"
| A. | .93" (23.7mm) |
|---|---|
| B. | 1.89" (48.2mm) |
| C. | .39" (10mm) |
Fixed Eye Snap Clip 2" (Open)
| A. | .45" (11mm) |
|---|---|
| B. | 1.53" (39.2mm) |