2-Bow 7/8" Bimini Frame Kit & Fittings 106" x 42" x 60" (Aluminum)
SKU: 121318
$448.60/EA
1 Available
Shipping Restrictions

Description

Build it yourself! This 2-Bow Bimini Frame Kit contains all the tubing and fittings needed to build a 2-bow bimini frame. A bimini top offers great protection from the sun and shelter from rain and spray. Building your own frame lets you save money and customize the design for your boat. This 2-bow frame kit includes the frames and fittings only and does not include webbing support straps, or fabric for the canvas top. To create a complete bimini, pair this kit with a 2-Bow Bimini Skin Kit (sold separately).

This adjustable 2-bow bimini frame is made from 7/8-inch drawn Brite anodized aluminum tubing. All tubing bows are bent in Sailrite’s custom jig and cut just beyond the bow to keep shipping costs down and provide for greater on-site customization. The “hockey stick” section of each bow is fitted with aluminum splines riveted into the appropriate place. This kit also includes Type 316 stainless steel Universal Deck Hinges, which feature pivoting hinges that easily adjust for mounting on different angles of decks, coamings or even vertical surfaces.

To select the appropriate frame kit for your boat, determine the desired width, height and spread (fore & aft) of your bimini and then use the specifications below. Frames are designed to be cut down from their original size. To cut the tubing, use a hacksaw with a blade with 24 teeth per inch. Adjustments to the listed measurements can be made for your boat. Remember, as the height is increased above the nominal height, the maximum typical spread decreases.

A drill, hacksaw, rivet tool and basic hand tools are required for installation of this kit. Webbing support straps or rigid support studs can be used to support the bows after installation and are sold separately. Webbing strap materials are included in Bimini Skin Kits. If you choose to install this bimini at your pushpit railing, you’ll need to purchase additional rail mount hardware.

Kit Includes:

  • 4 Eye Ends Type 316 Stainless Steel 7/8"
  • 2 Jaw Slides Type 316 Stainless Steel 7/8"
  • 2 Universal Deck Hinges Type 316 Stainless Steel
  • 8 Strap Eye Stainless Steel
  • 1 (10PK) Flat Head Wood Screws 6 x 1/2" Stainless Steel
  • 1 (5PK) Phillips Oval Head Tapping Screws #10 x 1-1/4" Stainless Steel
  • 2 (2PK) Grooved Rivets Stainless Steel (for Bimini & Dodger Frames)
  • 1 (10PK) Rivets Stainless Steel (for Marine Fittings)
  • 1 Filament Strapping Tape
  • 2-Bow 7/8" Aluminum Frame 106" x 42" x 60"
  • Instructions

Specifications

Hardware Material: Aluminum
Size: 7/8"
Tubing Diameter: 7/8 inch
Tubing Wall Thickness: 0.058 inch
Maximum Width: 106 inches
Max Spread (Fore and Aft): 42 inches
Nominal Height at Max Spread: 60 inches
Bow Angle to Waterline: 70° (Measurements above are determined at this angle. Angle can be modified to fit requirments.)
Bend Radius: 6 inches

Dimensions

Bow (X2)

A. 106”
B. 63”*

*Crown & fittings will add approximately 3"-5" to height


Shipping Restrictions

Adding this item to your shopping cart will eliminate the Post Office as a shipping selection.


Documents


Videos

How to Install a 2 Bow Bimini Frame

Shows how to assemble a 2-Bow Bimini Frame Kit from Sailrite.


Reviews

Overall Rating : 4.5 2 Reviews

0 Reviews
0 Reviews
0 Reviews
Page 1 of 1
Michel Van Lancker
3/2/2020
Verified Purchase

More than satisfied.

Product arrived as scheduled and packaged well. Thorough instructions were provided on paper and via online video. The hardware provided with this bimini frame is top quality. I am more than satisfied.

Kim G Hansen
10/1/2020
Verified Purchase

Good quality, but I recieved 1 base-fitting in the wrong diameter:-( annoying that you have to check for such a simple task.

Page 1 of 1

HAVE A QUESTION OR NEED TO PLACE AN ORDER?

We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769