You may also like
Flex-A-Rail is a great awning track for twisting around corners. Made of extruded PVC, this rail track can be bent using steam heat or a heat gun, if necessary. It is also easy to cut with a hacksaw and can be shaped with a dremel tool. Pair this awning track with a keder or vinyl awning rope which provides a great seal. Attach the awning rope to fabric or to a zipper and pull through the groove in the awning track.
To Install: Drill holes every 4–12 inches through the center of the track with at least one hole next to each end of the track. Screw down the track to secure.
Please Note: Installation screws are not included. This Flex-A-Rail requires specific screws: Screw Flat Head #4 x #6 x 3/4". These screws will not inhibit the Flex-A-Rail from working properly as they fit flush within the track.
Sailrite Pro Tip: Using this Flex-A-Rail track with an awning rope fits very snugly and is hard to work around a corner with a radius tighter than 10-inches.
|Hardware Material:||Plastic, Vinyl|
- This item is of a size or length that requires additional shipping fees.
- Adding this item to your shopping cart will eliminate the Post Office as a shipping selection.