Punch perfect circles every single time. This set includes seven sizes of sharp steel cutters to cut perfect holes in fabric, leather and more with the HandyPress® tool. This is an economically priced set intended for occasional use rather than commercial use. 

To ensure the cleanest cuts, Sailrite recommends putting a piece of cardboard between your material and the cutting board on your HandyPress.

This set includes cutters in the following sizes:

• 3/4" (20mm)
• 1" (25mm) 
• 1-1/4" (30mm) 
• 1-3/8" (35mm) 
• 1-1/2" (40mm) 
• 1-3/4" (45mm) 
• 2" (50mm)

To Use: 

1. Install the upper press plate onto the main vertical shaft's outer diameter.
2. Install the sliding flat workbench and cutting board onto the HandyPress base. Secure the workbench with its thumbscrew.
3. Set the tool for appropriate compression as directed in the HandyPress guidebook.
4. Place the material to be cut on the cutting board. Note: Sailrite recommends using a piece of cardboard between the cutting board and the material for the easiest, cleanest cuts. 
5. Place your chosen cutter on the area of the material you want to cut.
6. Holding the material in place with one hand, use your other hand to pull the handle down and cut a circle.

Please Note: This cutter set is an economically priced set intended for occasional usage. It is not intended for production-level use.