Cording Foot Set 1/4" for Fabricator®
Achieve better feeding than any other cording foot set! This 1/4-inch cording foot set is engineered to take curves perfectly without getting stuck or walking over the cording. This set is recommended for sewing piping with a 1/4-inch diameter or slightly smaller. It’s a great choice for soft 5/32-inch cording as well as 9/32-inch diameter cording. Set includes both the inside and outside feet.
For use on the following sewing machines:
- Sailrite® Fabricator®
- Sailrite® 111
- Consew 206RB
- Juki 1541
Please note: When this cording foot is used with the 5/32-inch medium welting cord and thick upholstery fabric, it works great. However, if the fabric is thin it will not work as well. If you plan to sew with a thin fabric, a smaller cording foot is best.