Easy Snap Fastener Installation Kit
This is a complete kit for hole cutting and snap fastener installation! Use this must-have installation kit to cut holes in fabric and install DOT® snap fastener buttons, sockets and cloth-to-cloth studs, Pull-The-DOT eyelets, gypsy studs, and Pull-The-DOT buttons, sockets and cloth-to-cloth studs.
First, use the Sailrite® Drill Hole Cutter 1/8" to cut a hole in your fabric while using the Sailrite® Cutting Block & Die Holder to protect your work surface. The drill hole cutter is compatible with a 3/8" drill chuck or larger. To use, secure the drill hole cutter in the drill chuck, place the Cutting Block & Die Holder behind the fabric on a hard, flat surface and firmly push the drill against the fabric to cut a hole.
Next, install snap fasteners with the Sailrite® Snap Fastener Deluxe Installation Tool. This tool is a two-piece, heavy-duty setting tool for snap fasteners. The metal anvil has two sides, one for setting buttons and the other for eyelets. This tool can be used without the base to set rivets. The Snap Fastener Deluxe Installation Tool is heat-treated, making it robust enough to set stainless steel snaps.
Snap fasteners sold separately.