How to Bend Awning Track

Item # X-HT-300067

Have you ever thought of using awning track on your boat? This tough track is used to attach fabric to a hard surface and can be used to secure covers, awnings, enclosure panels and even the front of dodgers. Awning track creates a snug and secure attachment, with a sleeker look than snaps. Several of these common uses require the awning track to have a bit of a bend, and some awning tracks will accommodate that better than others. Let’s take a look at the most bendable awning track, some tricks of the trade and how to make awning track work for your boat.

How to Bend Awning Track with a flange

PVC awning track end (left) and with slits cut in flange (right)

The traditional and most common type of awning track features a groove for the awning rope to feed into with a flange for securing to the hard surface. This type of track is available in aluminum or PVC. The traditional style of awning track has very little give, since it was not designed to bend. You can secure it around a gradual curve by cutting slits in the flange. Using a hacksaw carefully saw slits in the flange of the awning track. If you want to bend the track away from the flange, slits are fine. To bend the track towards the flange, cut in a V-shape.

For a more versatile curving awning track, try Flex-a-Rail. This track was made specifically to bend and can curve in any direction. It will even turn a corner with a radius as small as 10 inches. If the Flex-a-Rail seems stiff at first and you need it to curve more, boil a pot of water and hold the track in the steam coming off the water. You can also use a hairdryer or other hot air blower to heat Flex-a-Rail and traditional PVC track to increase the curve. The heat will loosen up the plastic and give you more flexibility. However, once the track cools, it will harden in the shape you’ve bent it in. So be sure you have it shaped just right! You can see this process in action in our "How to Bend & Install Flex-A-Rail Awning Track" video (#X-HT-200662).

Flex-A-Rail Awning Track taking a gentle curve

Flex-a-Rail Track

Since the Flex-a-Rail doesn’t have a flange, it is secured to hard surfaces with special screws that install in the groove of the track but sit under the rope. To install, bend the track in place where you want it, and drill a pilot hole through the track and into the installation surface. Then use a square-headed screwdriver to drive the screws into the surface.

You can find both of these types of awning track, awning rope, and great marine fabrics right here at Sailrite.

Do you use awning track on your boat? Are you thinking of using it? Share your experiences and opinions with us in the comments!