You may also like
Set brass and nickel #4 spur grommets using this die set and the C.S. Osborne W-1 Hand Press (sold separately). Spur grommets have metal spurs on the inside of the rim so they won’t easily pull out or spin in the fabric of your application, resulting in a longer lasting attachment.
This set contains three dies that both cut the hole and set your spur grommets. To use the dies, first install the cutting die in the top of the hand press and set the nylon cutting block (which is included with the tool) on the tool's base. After a hole is punched, install the two setting dies in the tool to set the spur grommets.
To install grommets, fit the male grommet piece onto the female die and the female grommet piece onto the male die. Then just firmly press the handle to set your grommet.
Please note: This set contains only the three #4 spur grommet dies. The W-1 Hand Press is sold separately.
Demo of CS Osborne W-1 Hand Press
How to Install Spur Grommets Using the W-1 Hand Press
High quality product, easy to use comes with clear directions.
These were Exactly what I needed for the Osborne hand press I ordered from you.
Grommets Die Set, well made material
Well made parts that don't need a really expensive hammer to use. A hand sledge worked just fine for me.
Great quality tools! The only problem I have is that the punch is too small for the 1/2" Grommets. The exterior diameter of the #4 Grommet post is closer to 5/8" than 1/2" so a larger punch is needed for rigid applications such as heavier leather.