You may also like
Batten End Caps 5/8" are designed to protect your sails from fiberglass batten ends. Fiberglass battens are hard to sand smooth across the grain and tend to delaminate at the ends unless protected. These batten end caps are designed to fit tightly over the batten end and in most cases require a little filing at the batten ends.
Note: These end caps can be used with 5/8" pultruded battens only. They cannot be used with RBS or Recmar battens.
|Hardware Material:||Nylon, Plastic|
Just what I was looking for, but, as we still have 16 inches of ice on the lake, it will be a while B4 I get 2 try them out! Thanks so much!
Exactly as advertised.
They don't fit the battens I purchase from you ...