For performance and durability it is hard to match Cam-Matic® cleats from Harken®. This standard-sized model works with a wide range of lines sizes from 1/8" (3 mm) up to 1/2" (12 mm). It features three rows of Delrin® ball bearings which allow the V-shape jaws to open and close smoothly under high loads. Lines are engaged with simple downward pressure. There is no need to pull highly loaded lines through the jaws to ease sheets or halyards - just flick up and the cleat will release instantly. Harken cleats are the only cleats that engage under maximum line tension.
In addition, the Cam-Matic patented geometry ensures that the same number of teeth grip the line regardless of its diameter. This special geometry feature holds all types of line (small, hard, high-tech, and soft large lines) with equal force and allows for the use of rounded teeth that do not damage lines. The round, die-cast aluminum jaws are hardcoat-anodized with a slippery Teflon™ impregnation which further resists line abrasion.
- Free-Rolling, UV-Stabilized Delrin® Ball Bearings Reinforced with Carbon-Black
- Holds Lines Securely, Releases Instantly
- Aluminum Pawls
- Hardcoat-Anodized for High-Load, High-Wear, and Continuous Adjustment Applications
|Length:||2-9/16 inches (65 mm)|
|Width:||1-1/4 inches (32 mm)|
|Weight:||2.5 ounces (71 g)|
|Height:||1-3/16 inches (30 mm)|
|Minimum Line Diameter:||1/8 inch (3 mm)|
|Maximum Line Diameter:||1/2 inch (12 mm)|
|Maximum Working Load:||300 pounds (136 kg)|
|Breaking Strength:||750 pounds (340 kg)|
|Fasteners:||#10 Flat Head (5 mm)(Fasteners Not Included)|
|Fastener Spacing:||1-1/2 inches (38 mm)(Center-to-Center)|